English: A Wehnelt interrupter, an antique electrical device invented in 1899 by German physicist Arthur Wehnelt and used with large induction coils until the 1920s. Induction coils require an interrupter in the primary circuit to periodically break the DC primary current to create the magnetic flux changes in the coil that induce voltage in the secondary coil. The Wehnelt interrupter consisted of a short platinum needle electrode projecting into a jar of electrolyte such as dilute sulfuric acid, and an anode electrode consisting of a lead plate. The above interrupter has three electrodes; the short platinum wires can be seen projecting out of the bottom of the white porcelain insulators. When the coil's primary current flowed through the interrupter, it continually created hydrogen gas bubbles on the platinum needle that repeatedly broke the circuit. The Wehnelt interrupter could create up to 2000 "breaks" per second, so it was superior to the vibrating arm "hammer" interrupters which were limited to a maximum rate of 200 breaks per second. It was used with the large induction coils that were employed to power cold-cathode x-ray machines and spark-gap radio transmitters up to the 1920s.
Fecha
antes de 1907
date QS:P,+1907-00-00T00:00:00Z/7,P1326,+1907-00-00T00:00:00Z/9
Unknown - The drawing is signed in lower right corner but the name is illegible except tor the first name "Cox"
Licencia
Public domainPublic domainfalsefalse
Este archivo está en el dominio público en los Estados Unidos. Esto se aplica a los trabajos de Estados Unidos donde los derechos de autor han expirado, a menudo porque su primera publicación ocurrió antes del 1 de enero de 1929. Véase esta página para explicación adicional.
Esta imagen puede estar protegida fuera de los Estados Unidos —especialmente en Canadá, China (excepto Hong-Kong, Macao, o el área de Taiwán), Alemania o Suiza—. El creador y el año de publicación son información esencial y deben ser proporcionados. Véase Wikipedia:Derechos de autor para más detalles.
Historial del archivo
Haz clic sobre una fecha y hora para ver el
archivo tal como apareció en ese momento.